Baox Quick Reference Guide
| Max CBD | 8 - 10% |
|---|
| CBD:THC Ratio | 25 : 1 |
|---|
| Max CBD (Delta 9 State) | 16 - 19% |
|---|
| Target Planting | April - Mid-July |
|---|
| Target Harvest | September - October |
|---|
| Spacing | 4-5 Inches |
|---|
BaOx is the best-selling hemp clone in our line. It's a fast-growing industrial hemp cultivar that is the result of a cross between Hindu Kush and Otto. BaOx hemp clones have become one of the most stable hemp crops grown in the southeast.
With a large cola, BaOx is a steady producer for CBD farmers throughout the United States and has become a mainstay on many farms. Because our BaOx hemp clones are produced from stable mother stock, you will get consistent CBD production from your fields. It's a vigorous cultivar that grows quickly, stays fairly compact and is one of the most resistant to pests and fungus in our trials. Normally grown for CBD, BaOx can also be grown for fiber and can average 2,500 lbs per acre.
Its long-standing, stable history in the hemp market makes BaOx hemp clones a no-brainer for most farmers.
Free Educational Content
Hemp Articles and Videos
Baox Industrial Hemp Downloads
| Document | Delta 9 | Total THC | Max CBD | Ratio |
|---|
General Growing Tips For Your Industrial Hemp
Industrial Hemp has different nutritional needs in different stages of the plant's development. Since you are buying rooted clones, there are only two periods of the plant's life-cycle that pertain to your grow.
Vegetative:
The vegetative stage occurs after the clones have finished rooting and lasts all the way to the flowering stage. During the veg stage, industrial hemp plants are storing up nutrients through absorption in the root system and photosynthesis in their leaves. This store of energy is required for the latter production of flowers. A plant that is unhealthy during its vegetative stage will not produce a maximum yield of CBD later in the mature cola. During the veg stage, hemp plants are especially hungry for nitrogen. They use this nutrient to build new stems at internodes, produce new leaves, and ultimately get ready to produce CBD in their flowers. For this reason, we use a higher nitrogen rate during the vegetative stage. Our preferred rate is an NPK ratio 3:1:2. For field-grown hemp we use 200 lbs of nitrogen per acre. For indoor-grown hemp we use 150 ppm nitrogen on a constant-feed program. Your soil will vary, so make sure to test your hemp crop for your local environment.
Flowering:
In high CBD production, the flower is where the money is. The flowering stage is the final phase in the natural reproductive cycle of the plant. Industrial hemp is a photoperiodic plant, which means it will begin the flowering stage as soon as the duration of sunlight declines. Each hemp variety has a small variance to light sensitivity, but a general rule of thumb is that industrial hemp plants begin the flowering stage when day length is less than 12 hours of sunlight. When we see flowering starting to develop, we usually run clear water (with no fertilizer) for about two weeks before we start a high phosphorus and potassium feeding program. We use an NPK ratio of 1:3:4 during the flowering stage and then cut back to clear water again about 2 weeks before harvest. For field-grown hemp we use 160 lbs of nitrogen per acre. For indoor-grown hemp we use 100 ppm nitrogen on a constant-feed program.
Industrial Hemp has different nutritional needs in different stages of the plant's development. Since you are buying rooted clones, you only need to focus on two major periods of the plant's life-cycle for your grow: vegetative and flowering. New research is always being done in this up-and-coming industry, and university studies are trialing new methods and practices in order to fine-tune Industrial Hemp agronomy. We offer our tried and true practices below, as well as ground-breaking research for you to investigate, test, and implement based on your own soil and plant needs.
Soil and Water Testing
Industrial hemp likes a soil with a
pH between 6.0-7.0.
Some new research from N.C. State University shows that a narrower pH range of 6.2-6.7 in field-grown conditions may be ideal.
A lab can test your irrigation water to help you know which nutrients your soil is getting from your water, which will inform your fertilizer program. Use target
PourThru electrical conductivity (EC) levels to help fine tune fertilizer rates. A low EC level indicates low nutrient availability while a high EC level may suggest that your plants cannot absorb nutrients or that you are over-fertilizing, both of which can cause leaf burn. Aim for the following targets during various stages of growth:
- Early Vegetative:
- Top Irrigation - EC of 1.0-1.5 mS/cm
- Sub-Irrigation - EC of .67-1.0 mS/cm
- Late Vegetative:
- Top Irrigation - EC of 1.5-2.0 mS/cm/cm
- Sub-Irrigation - EC of 1.0-1.3 mS/cm/cm
- Peak Flowering:
- Top Irrigation - EC of 2.0 to 2.5 mS/cm
- Sub-Irrigation - EC of 1.3-1.7 mS/cm
- Pre-Harvest:
- Top Irrigation - EC of 1.5-2.0 mS/cm
- Sub-Irrigation - EC of 1.0-1.3 mS/cm
Fertilizing
Closely monitor the nutrient levels available to your plants and keep them properly fed during the vegetative and flowering stages. These practices are extremely important to the success of your final product. In addition to drought and disease, the pressure of nutrient deficiency or excess nitrogen can cause Hemp plants to go hot. Careful attention to fertilizing (modified to accommodate your soil, environment, and the plant's growing stage) will play a major role in producing compliant plants with high CBD content.
Vegetative
The vegetative stage occurs after the clones have finished rooting and lasts all the way to the flowering stage. During the vegetative stage, industrial hemp plants are storing nutrients by absorbing them through the root system and using photosynthesis in their leaves. The plants need this store of energy to produce flowers later. If your hemp plants are unhealthy during the vegetative stage, they will not produce the maximum yield of CBD in the mature cola.
Nitrogen is the most important nutrient for hemp plants in the vegetative stage. They use this nutrient to build new stems at internodes, produce new leaves, and ultimately to produce CBD in their flowers. For this reason, we use a higher nitrogen rate during the vegetative stage. Depending on your soil, you may also need to add phosphorus and potassium prior to planting to bring it to proper levels.
Our preferred rate is an
NPK ratio 3:1:2. For field-grown hemp we use 200 lbs of nitrogen per acre. For
indoor-grown hemp we use 150 ppm N on a constant-feed program. Your soil will vary, so make sure to test your hemp crop for your local environment.
A study from NC State suggests a slightly higher nitrogen rate of 150-200 ppm N for the vegetative stage, ramped up to 200-225 ppm N just before flowering, both on a constant-feed program. That study also suggests a rate of 160-200 ppm K and 15-20 ppm P throughout the growth of the plants.
A
University of Missouri study suggests 50-150 pounds per acre of nitrogen applied twice: once prior to planting and once about 10 days after transplant. Phosphorus and potassium fertilizer should be applied based on nutrient levels available in soil.
Flowering
When growing for high CBD production, the money is in the flower, which is produced during the final stage of the plant's natural reproductive cycle. Industrial hemp is a photoperiodic plant, which means it will begin the flowering stage as soon as the duration of sunlight decreases to a particular amount, which varies slightly between varieties.
When we see flowering starting to develop, we usually run clear water (with no fertilizer) for about two weeks before we start a high phosphorus and potassium feeding program. We use an
NPK ratio of 1:3:4 during the flowering stage and then cut back to clear water again about 2 weeks before harvest. Whether you
flush your Industrial Hemp in this manner is up to you.
For
field-grown hemp we use 160 lbs of nitrogen per acre. For
indoor-grown hemp we use 100 ppm nitrogen on a constant-feed program. This
NC State study suggests a rate of 100-150 ppm N constant-feed during peak flowering.
Light
The general rule of thumb for industrial hemp is that the flowering stage will begin when day length is less than 12 hours of sunlight.
Pests & Disease
While pests and disease affect industrial hemp, there is still significant research to be done on which are the most detrimental and how to best protect hemp crops. Since the end of 2019, there are
58 EPA-approved pesticides to use on hemp. Before using pesticides, check your state regulations.
Some cultivars may have more natural resistance to pests and disease than others.
Some common pests found on industrial hemp:
- Corn Earworm is the most damaging pest for industrial hemp. These insects chew primarily the bud or flower of the plants. The chewing opens wounds in the plant which make it susceptible to gray rot. Monitor plants closely to remove infested plants at the first sign of corn earworm. A pesticide with the active ingredient Bacillus thuringiensis kurstaki or Bacillus thuringiensis aizawai may be approved in your state and is one of the few options for managing a corn earworm infestation.
- Cannabis Aphid is a rapidly reproducing aphid that can harm plant growth. More problematically, they excrete a sticky waste which makes cannabinoid extraction more difficult and can contaminate raw plant materials. Ladybugs are a natural enemy who can live entirely on a diet of aphids. Margosa and azadirachtin oils may also help control aphid populations.
- Hemp Russet Mites are microscopic four-legged mites which spread through trade of plants and by wind. They are especially harmful to greenhouse crops because of how close plants are and the mobility of the mites. They stunt growth and reduce leaf pairs and can cause irreparable damage to plants in a short time. Venerate is a promising chemical solution for this pest, but preventative action is most effective. Scout plants regularly and isolate any infested plants. Crops grown outdoors tend to be less affected.
- Caterpillars are present on hemp plants in various studies, but have not been shown to be particularly harmful.
Some common diseases that affect industrial hemp are:
- Sclerotinia sclerotiorum (White Mold)
- Botrytis cinerea (Gray Mold)
Be cautious with any use of pesticides, as they can contaminate the crop. Hemp is a bioaccumulative crop which easly absorbs pesticides (as well as heavy metals) from the soil.
Soil testing is extremely important for this reason, and you must use pesticides sparingly, even if they're approved for use. With so few pesticide or fungicide options, prevention is the best method of protection.
Start with healthy plants and use sanitary practices for transplanting, including isolating new plants for 1-2 weeks upon arrival to monitor them for disease or insects. Since fungal diseases are the main issue with hemp, excessive moisture and high humidity are the greatest risk factors. Plant in fields with well-drained soil, no prior history of diseases that affect hemp, good airflow, and no weeds. Consider planting CBD hemp into raised beds and position plant beds or rows for best drainage and airflow. Level any low spots so there's no place for water to accumulate and stand. Control irrigation water and do not overwater, especially during heavy rain. Give plants plenty of space for airflow and plant in sunny fields. Control weeds and remove diseased plants, but don't compost weeds or diseased plants. If you choose to use a fungicide, do it at the first signs of disease and use it at the prescribed rate.
Resources on pests and disease:
Harvesting
Most growers use a hand-harvest process for industrial hemp grown for CBD or CBG. Researchers are still developing methods to increase efficiency while protecting highly valuable flowers. Generally whole plants are heat- or air-dried to cure, then buds removed and the remainder of the plant thrown away. Mechanical options for harvesting increase potential damage to the plants. Most growers aim for 1-2 pounds of dry matter per plant with 8-10% CBD per pound.
